Connecting, staying connected, supported models, purchases and privacy. Most connection problems come down to three things: the same network, the projector in standby with its LAN cable connected, and no other controller holding the projector.
Put the phone and the projector on the same network and subnet; guest networks, isolated VLANs and client isolation keep them apart. The scan looks at your own /24 subnet. If it does not turn the projector up, add it by IP address. Network control uses TCP port 20554, and newer models need the network password set on the projector.
The network password configured on the projector itself, not a Wi-Fi password. Newer models use 8 to 10 characters. The app keeps it in the device's secure storage, on this device only, and leaves it out of backups.
A projector that is powered fully off cannot answer. Keep it in standby with its LAN cable connected. On some models an energy saving standby setting such as Eco Mode stops the network from answering in standby; check the projector's own network and standby settings.
A JVC projector serves one network controller at a time. If Home Assistant, a control system or another app is connected, this app cannot connect until it lets go, and the reverse is also true. This app lets go of the projector when it goes to the background.
After three failed attempts in a row the app looks for the projector on your network by its MAC address and reconnects to its new address. It needs to have connected once before, so it knows the MAC address. You can also change the address with Edit connection in Settings.
An unlisted D-ILA projector still gets power, input and the remote keys. Settings that a model's command table does not offer are not shown, rather than sent blind. Settings, About, Supported Projectors lists every model the app knows and its support level.
The app shows a control only when your model's command table lists it and the projector answers for it. Controls also wait while the projector is in standby or warming up, and appear once it is on.
Yes. Pro, Home Automation and the bundle are one-time purchases with no subscription and no ads. The store shows the price in your own currency before you confirm.
Sign in to the same store account and tap Restore on the Pro card in Settings. A purchase belongs to the store account, not to the device. If nothing is found, the app says so.
Crash reports on Android and iOS are on by default and can be turned off in Settings, About. Usage analytics are off until you accept them, and never include your projector's name, address, MAC or password.
Yes, on a DLA-NZ500: connecting with the network password, reading its state and changing settings. Other models are supported from JVC's published command tables, and the app only offers what each model's table lists.
Guided Setup and the add screen check the address you give and name the first thing that failed. Each result comes with what to do next.
| Result | What it means | What to do |
|---|---|---|
| Different network | The phone and the projector are on different subnets. | Put the phone on the same network as the projector, not a guest network, or allow traffic between VLANs. |
| No device at that address | Nothing answered at that address. | Check the IP in the projector's network settings, and that it is in standby with its LAN cable connected. |
| Control port refused | Something is at the address but refused the control port. | Check the port. JVC D-ILA projectors use 20554 by default. |
| No reply on the control port | The port timed out with no answer. | The projector may be fully off, another controller may be connected, or the network may block device-to-device traffic (client or AP isolation). |
| Password needed | The projector asks for a network password. | Enter the network password set on the projector. |
| Password not accepted | The projector refused the password. | Check the password on the projector and enter it again. |
| Projector busy | Another controller is connected. | Close other apps or systems that control the projector, wait a few seconds and check again. |
| Not a JVC reply | Something answered but did not complete a JVC handshake. | Check the address: the port may belong to a different device. |
The app knows 43 model profiles. Each name below is a model or a regional name for one.